- Transmission[1]
- Other Auto Parts[10]
- Transmission Belts[10]
- Rubber Belts[6]
- Contact Person : Mr. Li Looney
- Company Name : Zhoushan Huayi Autoparts Manufacture Co., Ltd.
- Tel : 86-20-86346133
- Fax : 86-20-61153070
- Address : Zhejiang,zhoushan,Dajiao cun, Gaoting Town, Daishan County, Zhoushan, Zhenjiang
- Country/Region : China
Related Product Searches:6PK1775 Poly rubber v ribbed Pk belt EPDM / CR /HNBR for automobile MITSUBISHI,High Quality,pk belt, TRANSMISSION BELT,6PK1775
Characteristics:
1.Low-noise operation
2.High-efficiency drive
3.Accurate transmission
4Anti-cold, anti-heat, anti-oil performance
5.Abrasion resistance, good tensile strength
6.Maintenance-free, 80000kms life expectancy
Construction
1.Top surface- PVC wear resistant rubber
2.Tension line- a very low elongation of the glass fiber
3.Tension Line
4.Base layer-PVC rubber
5.Fabric-abrasion-resistant polyamide
Auto transmission belts Type
1.Auto Timing belt ZA , ZB, ZBS, MR, MY, RU, YU,YS,YR,S8M
2. V belt Z FM A B C 3V 5V 8V SPZ SPA SPB SPC
3. Rubber v-ribbed belt fan belt PK PL PJ PM PH
Type | P(mm) | H(mm) | Rib number range | Valid length range(mm) |
PH | 1.6 | 3 | Mar-54 | 500-2800 |
PJ | 2.34 | 4 | Mar-60 | 500-2800 |
PK | 3.56 | 6 | Mar-42 | 375-3200 |
PL | 4.7 | 10 | Mar-30 | 900-3200 |
PM | 9.4 | 17 | Mar-15 | 1500-3200 |
Application
MERCEDES BENZ C-CLASS (W202)MERCEDES BENZ C-CLASS (W203)MERCEDES BENZ C-CLASS Coupe (CL203)MERCEDES BENZ C-CLASS Estate (S202)MERCEDES BENZ C-CLASS T-Model (S203)MERCEDES BENZ CLK (C208)
NOTICE TO USE OF TRANSMISSION BELT
Protection:
1.To avoid direct sunshine and rain and snow,keep clean,and protect,keep normal temperature
2.To avoid contact with materials affect quality of rubber like acid,alkali,organic solution ,and poison drug.
3.Put it correctly,to avoid transfigurafion cause by squeezing.
4.Hang it on holders or put it flat,cannot put it on ground
Installation:
1.It is forbidden to install it in force
2.Correctly adjust parallelism and eccentricit these belts
Tension:
1.To apply tension correctly ,defletion and loading should be calculated when tension of the belt is adjusted
2.The surface harshness should be between Ra 1.6-Ra 3.2
Belts should be used after rust is removed
1.Paint wax can not to coated on the belts and rubber
2.To avoid rubber and belts polluted by dust and oil
Please checkis there is any wear and tear on the belts,If the belt is seriously worn ,please replace it
6PK1775 Poly rubber v ribbed Pk belt EPDM / CR /HNBR for automobile MITSUBISHI